第5回
PaM(原因除去型保全)導入に向けた潤滑油管理の取組みについて
著者:
杉原 雅紀,Masanori SUGIHARA,広瀬 逸夫,Itsuo HIROSE,矢野 裕二,Yuji YANO
発刊日:
公開日:
キーワードタグ:
Lubricant management is very important to maintain the integrity of rotating equipment. Lubricant is periodically replaced and monitored on its aging degr adation between replacement times. On the other hand, only the confirmation of specification document has been performed as acceptance inspection in case of new lubricant. However, a comparatively large amount of impurity substances has been found in new lubricant by sample analysis. Therefore, the introduc tion of contamination control of new lubricant ...
英字タイトル:
Application of Contamination Control of Lubricant to Proactive Maintenance
第2回
レーザを応用した炉内保全技術とそのPWRへの適用
著者:
佐伯 綾一,Ryoichi SAEKI,佐野 雄二,Yuji SANO,黒田 英彦,Hidehiko KURODA,落合 誠,Makoto OCHIAI,田村 雅貴,Masataka TAMURA,河野 渉,Wataru KONO
発刊日:
公開日:
キーワードタグ:
Toshiba has developed laser-based maintenance, inspection and repair technologies as countermeasures against stress corrosion cracking (SCC) in nuclear power reactors. Laser peening (LP) is a novel process for preventive maintenance, which improves residual stress from tensile to compressive on material surface by irradiation laser pulses in water. Laser-ultrasonic testing (LUT) is capable of detecting and sizing SCC having a depth of about 0.5 mm. Underwater laser welding can be fulfilled by making local ...
英字タイトル:
Laser based maintenance technologies for PWR power plants
第10回
レーザピーニングによる低圧タービン動翼の疲労強度改善
著者:
千田 格,Itaru CHIDA,佐野 雄二,Yuji SANO,廣田 圭一,Keiichi HIROTA,犬飼 隆夫,Takao INUKAI,角谷 利恵,Rie SUMIYA,佐々木 英寿,Hidekazu SASAKI,野村 光,Hiroshi NOMURA
発刊日:
公開日:
キーワードタグ:
Some damages were found at the forks of low pressure turbine blades caused by random vibration and steam-flashback vibration. In this study, for the aim of fatigue property improvement, laser peening technology for 12Cr stainless steel was developed and material properties were examined. Laser peening is a process to induce compressive residual stress to the material surface. Fatigue specimens which simulate the stress concentration zone of forks were fabricated and laser peening was applied to the su...
英字タイトル:
Development of laser peening technology for low pressure turbine blades to improve fatigue properties
第3回
炉内保全用レーザピーニングシステムの高度化
著者:
向井 成彦,Naruhiko MUKAI,上原 拓也,Takuya UEHARA,末園 暢一,Nobuichi SUEZONO,佐伯 綾一,Ryoichi SAEKI,佐野 雄二,Yuji SANO
発刊日:
公開日:
キーワードタグ:
Abstract: Laser peening (LP) is a process to introduce residual compressive stress on metal surface by irradiating laser pulses underwater without any surface preparations. Toshiba has developed and applied LP system to preventive maintenance against stress corrosion cracking (SCC) in nuclear power reactors since 1999. The system is composed of laser oscillators, a beam delivery system, a laser irradiation head, remote handling equipment and a monitor/control system. In the early applications, a rigidly l...
英字タイトル:
Next Generation LP System for Maintenance in Nuclear Power Reactors